rsync 文件同步的常见错误与解决方法整理

我们都是通过错误日志查看

在rsyncd.log里面或.err文件里面,大家可以用记事本打开查看。

注意windows下面我们需要给SvcwRsync用户,管理同步目录的所有权限,基本上这样就可以了

问题一:

@ERROR: chroot failed

rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3]

原因:

服务器端的目录不存在或无权限,创建目录并修正权限可解决问题。

问题二:

@ERROR: auth failed on module tee

rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3]

原因:

服务器端该模块(tee)需要验证用户名密码,但客户端没有提供正确的用户名密码,认证失败。
提供正确的用户名密码解决此问题。

问题三:

@ERROR: Unknown module ‘tee_nonexists’

rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3]

原因:

服务器不存在指定模块。提供正确的模块名或在服务器端修改成你要的模块以解决问题。

 

问题1:

在client上遇到问题:

rsync -auzv –progress –password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
rsync: could not open password file “/etc/rsync.pas”: No such file or directory (2)

Password:

@ERROR: auth failed on module backup

rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
遇到这个问题:client端没有设置/etc/rsync.pas这个文件,而在使用rsync命令的时候,加了这个参数– password-file=/etc/rsync.pas

问题2:

rsync -auzv –progress –password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
@ERROR: auth failed on module backup

rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]

遇到这个问题:client端已经设置/etc/rsync.pas这个文件,里面也设置了密码111111,和服务器一致,但是服务器段设置有错误,服务器端应该设置/etc/rsync.pas ,里面内容root:111111 ,这里登陆名不可缺少

问题3:

rsync -auzv –progress –password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
@ERROR: chdir failed

rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]

遇到这个问题,是因为服务器端的/home/backup 其中backup这个目录并没有设置,所以提示:chdir failed

 

问题4:

rsync: write failed on “/home/backup2010/wensong”: No space left on device (28)

rsync error: error in file IO (code 11) at receiver.c(302) [receiver=3.0.7]

rsync: connection unexpectedly closed (2721 bytes received so far) [generator]

rsync error: error in rsync protocol data stream (code 12) at io.c(601) [generator=3.0.7]

磁盘空间不够,所以无法操作。

可以通过df /home/backup2010 来查看可用空间和已用空间

 

问题5:网络收集问题

1、权限问题

类似如下的提示:rsync: opendir “/kexue” (in dtsChannel) failed: Permission denied (13)注意查看同步的目录权限是否为755

 

2、time out rsync: failed to connect to 203.100.192.66: Connection timed out (110) rsync error: error in socket IO (code 10) at clientserver.c(124) [receiver=3.0.5]

检查服务器的端口netstat –tunlp,远程telnet测试。 可能因为客户端或者服务端的防火墙开启 导致无法通信,可以设置规则放行 rsync(873端口) 或者直接关闭防火墙。 还有一种在同步过程中可能会提示没有权限 (将同步目录加上SvcwRsync全部权限即可,更简单的方法就是将SvcwRsync设为管理员即可)

 

3、服务未启动

rsync: failed to connect to 10.10.10.170: Connection refused (111)

rsync error: error in socket IO (code 10) at clientserver.c(124) [receiver=3.0.5]

启动服务:rsync –daemon –config=/etc/rsyncd.conf

 

4、磁盘空间满

rsync: recv_generator: mkdir “/teacherclubBackup/rsync……” failed: No space left on device (28)

*** Skipping any contents from this failed directory ***

 

5、Ctrl+C或者大量文件

rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(544) [receiver=3.0.5]

rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(544) [generator=3.0.5]

说明:导致此问题多半是服务端服务没有被正常启动,到服务器上去查查服务是否有启动,然后查看下 /var/run/rsync.pid 文件是否存在,最干脆的方法是杀死已经启动了服务,然后再次启动服务或者让脚本加入系统启动服务级别然后shutdown -r now服务器

 

6、xnetid启动

rsync: read error: Connection reset by peer (104)

rsync error: error in rsync protocol data stream (code 12) at io.c(759) [receiver=3.0.5]

查看rsync日志

rsync: unable to open configuration file “/etc/rsyncd.conf”: No such file or directory xnetid

查找的配置文件位置默认是/etc下,根据具体情况创建软链接。例如:

ln -s /etc/rsyncd/rsyncd.conf /etc/rsyncd.conf

或者更改指定默认的配置文件路径,在/etc/xinetd.d/rsync配置文件中。

Rsync configure:

配置一:

ignore errors

说明:这个选项最好加上,否则再很多crontab的时候往往发生错误你也未可知,因为你不可能天天去看每时每刻去看log,不加上这个出现错误的几率相对会很高,因为任何大点的项目和系统,磁盘IO都是一个瓶颈

 

Rsync error:

错误一:

@ERROR: auth failed on module xxxxx

rsync: connection unexpectedly closed (90 bytes read so far)

rsync error: error in rsync protocol data stream (code 12) at io.c(150)

说明:这是因为密码设置错了,无法登入成功,检查一下rsync.pwd,看客服是否匹配。还有服务器端没启动rsync 服务也会出现这种情况。

 

错误二:

password file must not be other-accessible

continuing without password file

Password:

说明:这是因为rsyncd.pwd rsyncd.sec的权限不对,应该设置为600。如:chmod 600 rsyncd.pwd

 

错误三:

@ERROR: chroot failed

rsync: connection unexpectedly closed (75 bytes read so far)

rsync error: error in rsync protocol data stream (code 12) at io.c(150)

说明:这是因为你在 rsync.conf 中设置的 path 路径不存在,要新建目录才能开启同步

 

错误四:

rsync: failed to connect to 218.107.243.2: No route to host (113)

rsync error: error in socket IO (code 10) at clientserver.c(104) [receiver=2.6.9]

说明:防火墙问题导致,这个最好先彻底关闭防火墙,排错的基本法就是这样,无论是S还是C,还有ignore errors选项问题也会导致

 

错误五:

@ERROR: access denied to www from unknown (192.168.1.123)

rsync: connection unexpectedly closed (0 bytes received so far) [receiver]

rsync error: error in rsync protocol data stream (code 12) at io.c(359)

说明:此问题很明显,是配置选项host allow的问题,初学者喜欢一个允许段做成一个配置,然后模块又是同一个,致使导致

 

错误六:

rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(244) [generator=2.6.9]

rsync error: received SIGUSR1 (code 19) at main.c(1182) [receiver=2.6.9]

说明:导致此问题多半是服务端服务没有被正常启动,到服务器上去查查服务是否有启动,然后查看下 /var/run/rsync.pid 文件是否存在,最干脆的方法是杀死已经启动了服务,然后再次启动服务或者让脚本加入系统启动服务级别然后shutdown -r now服务器

 

错误七:

rsync: read error: Connection reset by peer (104)

rsync error: error in rsync protocol data stream (code 12) at io.c(604) [sender=2.6.9]

说明:原数据目录里没有数据存在

 

rsync 错误与解决方法整理补充篇

由于我们经常使用rsync进行服务器文件的同步工作,但在配置过程中,会出现很多问题,下面的错误基本上都是通过客户端返回的错误进行分析。

另外查找错误过程中也学到了一个查看错误的方法-查看系统日志,我们操作的每步都会在日志上有说明,有时候报错看不懂,日志上都写的清清楚楚。

命令:cat /var/log/messages

 

问题一:

@ERROR: auth failed on module bachup
rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3]

原因:服务器端该模块(backup)需要验证用户名密码,但客户端没有提供正确的用户名密码,认证失败。  提供正确的用户名密码解决此问题。

这个问题比较蠢,如果可能你和我一样明明在模块里写了密码文件,怎么都不通,这个时候我劝你先检查一下所写模块中是不是和下图一样。比如,某处多了个s。

 

问题二:110错误 -time out

rsync: failed to connect to 203.100.192.66: Connection timed out (110)

rsync error: error in socket IO (code 10) at clientserver.c(124) [receiver=3.0.5]

原因:检查服务器的端口netstat –tunlp,远程telnet测试。 可能因为客户端或者服务端的防火墙开启 导致无法通信,可以设置规则放行 rsync(873端口) 或者直接关闭防火墙。

在这里博主是重启过服务器,然后就报110了,直接开启rsync服务就行。

命令:service rsyncd start

 

问题三:113错误 -防火墙

rsync: failed to connect to 218.107.243.2: No route to host (113) rsync error: error in socket IO (code 10) at clientserver.c(104) [receiver=2.6.9]

原因:防火墙问题导致,这个很简单,关闭防火墙就可以。不过博主还是被困在这里几个小时,因为linux防火墙分两种:

-iptable和-firewall

认识到这个问题首先查看系统的防火墙种类,查看防火墙状态即可

service iptable status

firewall-cmd –state

确定防火墙种类后再按对应方法将防火墙关闭即可。

 

问题四:1516错误

@ERROR: auth failed on module backup

rsync error: error starting client-server protocol (code 5) at main.c(1516) [Receiver=3.0.9]

解决:这个问题错误差别很大,可查看系统日志查看错误,再搜索解决方法。

注意:一般这种情况都建立在可以连通的基础。去服务端查看系统日志,可以查看相关错误。

命令:cat /var/log/massages

cat /var/log/rsyncd.log


数据运维技术 » rsync 文件同步的常见错误与解决方法整理